Configuring Aim Devices

BLURRED products support most aim devices. MAKCU, KMBOX, KMBOX NET, etc.

KMBOX NET

1

On the DMA PC

• download KMBOX NET drivers

• extract the KMBOX NET Drivers folder to the desktop

• run WCHUSBNIC.exe, follow the install wizard

• reboot the PC

• press the Windows key, type ncpa.cpl, press ENTER

  • or, navigate to the adapter settings panel in the Windows control panel

• while looking at the available network adapters, unplug and replug the KMBOX NET to identify which network adapter is the KMBOX NET adapter

• right click on the KMBOX NET adapter, click Properties

  • uncheck (disable) Internet Protocol Version 6 (TCP/IPv6)

• click on Internet Protocol Version 4 (TCP/IPv4) (to select it), click the Properties button

• set the following configuration:

• click OK to save changes

2

Configure the menu

• load up BLURRED

• click DEBUG

• under KMBOX NET, configure the IP/PORT/UUID

  • these values will be present on the KMBOX NET's screen

• click CONNECT

• use the TEST MOVE and TEST CLICK buttons to test the configuration was done correctly

  • if these buttons do not MOVE or CLICK on the GAMING PC, reboot both PCs and retry

KMBOX B+ PRO

1

On the DMA PC

• download KMBOX drivers

• extract kmbox.exe to the desktop

• run kmbox.exe, follow the install wizard

• reboot the PC

2

Configure the menu

• load up BLURRED

• click DEBUG

• under GENERAL TESTS, click Reconnect KMBox B+ (This will disconnect KMBox Net)

• use the TEST MOVE and TEST CLICK buttons to test the configuration was done correctly

  • if these buttons do not MOVE or CLICK on the GAMING PC, unplug and replug the KMBOX B+ PRO and click Restart KMBox

MAKCU Configuration

MAKCU devices are natively supported - no configuration is needed. Simply plug and play.